Aquatik Angels

Log In
Secure Checkout
Free Shipping*
Expert Support
Quality Guaranteed
7-Day Easy Returns. View Policy
Product Details
Monitor two essential aquarium water parameters continuously with Seachem Alert Combo Pack 6 Month, an innovative 2-in-1 freshwater aquarium pH and ammonia monitoring kit designed to help aquarium hobbyists maintain stable water conditions and protect ornamental fish.
Buy Seachem Alert Combo Pack 6 Month Online in India at Aquatik Angels – Your Trusted Online Aquarium & Aquascaping Store in India and Chennai.
Manufactured by Seachem Laboratories, the Alert Combo Pack includes two advanced water-monitoring indicators: Seachem pH Alert and Seachem Ammonia Alert.
These compact, colour-changing devices provide continuous visual monitoring without chemical reagents, batteries, electrical connections, or repeated manual testing procedures.
Aquarium fish depend on stable water conditions for normal biological functions. Unexpected changes in pH or increases in toxic free ammonia can cause stress, interfere with respiration, and threaten fish health.
The Seachem Alert Combo Pack helps aquarium owners recognize important changes in aquarium water quality through easy-to-read colour indicators.
The included Seachem pH Alert continuously monitors freshwater aquarium pH between 5.4 and 8.0.
Its reversible sensor changes colour from yellow through orange to red as pH changes.
This allows aquarists to observe shifts in aquarium water acidity and alkalinity without repeatedly performing chemical tests.
When first installed, pH Alert takes approximately 30 minutes to respond. After initial equilibration, subsequent pH changes are registered in approximately 10 minutes.
The pH Alert included in the 6 Month Combo Pack is designed for approximately 3–6 months of use, depending on operating conditions.
The included Seachem Ammonia Alert continuously monitors toxic free ammonia (NH₃), one of the most important water-quality concerns in ornamental fishkeeping.
Its sensor changes reversibly from yellow to green and blue according to ammonia concentration.
The indicator detects free ammonia below 0.05 mg/L (ppm) and provides visual warnings through four levels:
SAFE: Below 0.02 ppm
ALERT: 0.05 ppm
ALARM: 0.2 ppm
TOXIC: 0.5 ppm
The ammonia sensor responds to increasing ammonia in approximately 15 minutes.
It has a typical service life of approximately one year under normal conditions.
Both sensors are compact, transparent, and designed for discreet installation inside the aquarium or filter chamber.
Each indicator measures approximately 1.5 × 2.5 inches, helping it blend into the aquarium without significantly affecting the display.
Simply install the indicators, allow them to adjust to aquarium conditions, and observe their colour readings regularly.
The Seachem Alert Combo Pack is suitable for freshwater ornamental fish aquariums, planted aquariums, tropical community tanks, freshwater breeding systems, and quarantine aquariums.
Important: The pH Alert component is designed for freshwater use only. Although Ammonia Alert is suitable for both freshwater and marine water, the complete Alert Combo Pack is primarily intended for freshwater aquarium monitoring.
Includes one Seachem pH Alert and one Seachem Ammonia Alert for convenient aquarium monitoring.
Tracks freshwater pH changes throughout the day.
Monitors toxic free ammonia without requiring repeated water sampling.
Provides easy-to-read visual readings using reversible sensor technology.
Measures pH between 5.4 and 8.0.
Detects potentially harmful free ammonia concentrations below 0.05 ppm.
Registers subsequent pH changes in approximately 10 minutes and increasing ammonia in approximately 15 minutes.
Designed for approximately 3–6 months of freshwater pH monitoring.
Provides approximately one year of continuous free ammonia monitoring.
Regular visual readings do not require liquid testing chemicals.
Operates through passive colour-changing sensor technology.
Discreet appearance inside freshwater aquarium displays.
Both indicators can be positioned visibly inside an aquarium or suitable filtration chamber.
Suitable for monitoring freshwater planted tanks.
Useful for checking water conditions while fish are isolated.
Helps observe pH and ammonia conditions in freshwater breeding systems.
Provides useful free ammonia monitoring during aquarium establishment.
Requires minimal care beyond gentle algae removal and timely replacement.
| Specification | Details |
|---|---|
| Brand | Seachem |
| Manufacturer | Seachem Laboratories |
| Product Name | Alert Combo Pack 6 Month |
| Product Category | Aquarium Water Testing & Monitoring |
| Product Type | Continuous pH & Ammonia Monitor |
| Included Components | pH Alert + Ammonia Alert |
| Monitoring Method | Reversible Colour-Changing Sensors |
| pH Measurement Range | 5.4–8.0 |
| pH Sensor Response | Approximately 30 Minutes Initially |
| Subsequent pH Response | Approximately 10 Minutes |
| pH Sensor Life | Approximately 3–6 Months |
| Ammonia Measurement | Free Ammonia (NH₃) |
| Ammonia Detection | Below 0.05 ppm |
| Ammonia Response to Increase | Approximately 15 Minutes |
| Ammonia Response to Decrease | Approximately 4 Hours from TOXIC to SAFE |
| Ammonia Sensor Life | Approximately 1 Year |
| pH Alert Compatibility | Freshwater Only |
| Ammonia Alert Compatibility | Freshwater & Marine |
| Batteries Required | No |
| Chemical Reagents Required | No |
| Installation | Aquarium or Suitable Filter Chamber |
| Package Quantity | 2 Monitoring Indicators |
pH indicates how acidic or alkaline aquarium water is.
Different freshwater fish species have different preferred pH ranges.
For example, certain tropical freshwater species naturally inhabit soft, acidic water, while others prefer neutral or alkaline conditions.
Sudden pH fluctuations can affect fish health and normal biological functions.
Aquarium pH may change because of:
Biological waste production
Carbon dioxide fluctuations
Low buffering capacity
Water changes
Certain aquarium substrates
Rocks and mineral-based decorations
Water-conditioning practices
Seachem pH Alert helps aquarium owners observe pH changes continuously.
It does not increase, decrease, or stabilize pH.
Aquarists should correct underlying water-chemistry problems using appropriate methods rather than making sudden adjustments.
Ammonia is produced when organic waste breaks down inside an aquarium.
Common sources include fish waste, decomposing food, damaged plants, dead organisms, and inadequate biological filtration.
Aquarium ammonia exists primarily in two forms:
Free Ammonia (NH₃): The more toxic un-ionized form.
Ammonium (NH₄⁺): The less toxic ionized form.
The balance between these forms is influenced by pH and temperature.
As aquarium pH increases, a greater proportion of total ammonia can exist as toxic free ammonia.
Seachem Ammonia Alert measures free ammonia directly, making it useful for identifying potentially dangerous conditions.
Important: Ammonia Alert does not measure total ammonia. Additional testing may be needed to assess the complete nitrogen cycle.
The Alert Combo uses two independent colour-changing sensors.
The pH sensor changes colour according to aquarium pH.
Its indicator displays values across the range of 5.4–8.0.
The aquarist interprets the reading by matching the sensor colour to the printed pH colour wheel.
The ammonia sensor responds to free ammonia concentration.
Its colour changes from yellow to green and blue as the concentration increases.
The aquarist matches the sensor colour with the SAFE, ALERT, ALARM, and TOXIC reference scale.
Both devices provide continuous visual information while remaining installed in the aquarium.
| Indicator | Free Ammonia Level | Recommended Action |
|---|---|---|
| SAFE | Below 0.02 ppm | Continue normal monitoring |
| ALERT | 0.05 ppm | Investigate and monitor closely |
| ALARM | 0.2 ppm | Take prompt corrective action |
| TOXIC | 0.5 ppm | Immediate intervention required |
The sensor indicates that free ammonia is below the SAFE threshold.
Continue routine aquarium maintenance.
The sensor detects elevated free ammonia.
Check feeding practices, filtration performance, and organic waste accumulation.
Consider an appropriate partial water change.
The sensor identifies potentially harmful free ammonia.
Promptly investigate and correct the underlying water-quality problem.
The sensor indicates dangerous free ammonia.
Immediate corrective action is necessary, including suitable water changes, improved aeration, and appropriate ammonia control measures.
Remove both indicators from their packaging.
Select a clearly visible location inside the freshwater aquarium or suitable filter chamber.
Install the pH Alert and Ammonia Alert separately.
Ensure both sensing surfaces remain in contact with aquarium water.
Allow the pH sensor approximately 30 minutes for its initial response.
Allow the ammonia sensor time to equilibrate with aquarium conditions.
Observe the colour indicators regularly.
Match each sensor colour against its corresponding reference wheel.
Investigate unexpected changes in pH or free ammonia.
Replace the sensors when they reach the end of their useful service life.
Planted aquariums contain fish, aquatic plants, substrates, and beneficial microorganisms.
pH may fluctuate because of carbon dioxide concentration, plant activity, substrate chemistry, and buffering capacity.
Ammonia may accumulate during the establishment of a new planted aquarium or after significant organic waste decomposition.
The Alert Combo helps monitor these conditions.
For heavily planted aquariums operating at low pH, remember that pH Alert measures only down to 5.4 and that additional total-ammonia and nitrogen-cycle testing may still be necessary.
Freshwater community tanks may contain tetras, rasboras, gouramis, angelfish, livebearers, and other compatible ornamental fish.
Stable aquarium water quality helps maintain normal fish health.
The Alert Combo provides a practical way to observe changes in pH and free ammonia.
It is particularly useful when aquarium stocking, feeding, or filtration conditions change.
Breeding aquariums require careful environmental management.
Fish eggs, fry, and juvenile fish may be sensitive to unsuitable water conditions.
The Alert Combo allows breeders to monitor pH and free ammonia without repeatedly collecting water samples.
Additional testing for nitrite, nitrate, hardness, and other parameters may still be needed depending on the species.
Quarantine aquariums are often temporarily established for observing newly acquired fish.
Their biological filtration may be less mature than established display aquariums.
The ammonia indicator can help identify free ammonia increases during quarantine.
The pH indicator provides additional information about freshwater conditions.
Some dye-based medications may interfere with sensor colours. Use supplementary water tests when necessary.
A new aquarium requires sufficient beneficial bacteria to convert ammonia into nitrite and then nitrate.
The nitrogen cycle generally follows:
Organic Waste → Ammonia → Nitrite → Nitrate
The ammonia sensor helps identify free ammonia accumulation during aquarium establishment.
However, a SAFE ammonia reading does not confirm that the biological filtration system is fully mature.
Regular nitrite and nitrate testing remains important.
Seachem Alert Combo requires minimal routine maintenance.
Follow these recommendations:
Keep the sensing surfaces clean and unobstructed.
Gently remove algae using a clean, soft material.
Avoid touching the sensors directly with fingers.
Do not use soap, bleach, detergents, or abrasive materials.
Be aware that certain dye-based medications may discolour the sensors.
Read the indicators under natural daylight or daylight-equivalent lighting.
Avoid relying on strongly coloured aquarium lighting for interpreting readings.
Observe the sensors for fading or loss of colour response.
Replace exhausted sensors.
The pH Alert sensor may require replacement after approximately 3–6 months.
The Ammonia Alert sensor typically lasts about one year.
The complete Alert Combo Pack is primarily intended for freshwater aquariums.
The pH Alert sensor must not be used for marine pH monitoring.
pH Alert measures only between 5.4 and 8.0.
Ammonia Alert detects free ammonia, not total ammonia.
Neither device changes or corrects aquarium water chemistry.
Allow newly installed sensors to adjust to aquarium conditions.
Do not touch or damage the sensing surfaces.
Do not clean with bleach, detergent, or abrasive materials.
Certain medications may affect colour readings.
Use appropriate lighting when reading sensor colours.
Replace sensors when exhausted or no longer responding reliably.
Continue monitoring ammonia, nitrite, nitrate, and other parameters with appropriate additional tests.
Do not ignore elevated free ammonia readings.
Maintain biological filtration and appropriate aquarium maintenance.
Avoid sudden pH adjustments.
Investigate the cause of unexpected changes before adding water-treatment chemicals.
It provides continuous monitoring of freshwater aquarium pH and toxic free ammonia.
One pH Alert indicator and one Ammonia Alert indicator.
Yes. It monitors two important aquarium water parameters.
No.
No. Both indicators use colour-changing sensors.
5.4–8.0.
Approximately 30 minutes when first installed, followed by approximately 10 minutes for subsequent pH changes.
The 6 Month version is intended for approximately 3–6 months of use.
Approximately one year.
Yes. It measures free ammonia (NH₃).
No. It measures free ammonia rather than the combined total of ammonia and ammonium.
Approximately 15 minutes to increasing free ammonia.
Free ammonia is below 0.02 ppm.
Free ammonia is approximately 0.05 ppm.
Free ammonia is approximately 0.2 ppm.
Free ammonia is approximately 0.5 ppm.
Yes. It is suitable for freshwater planted aquariums.
The Ammonia Alert component supports marine use, but the pH Alert component is freshwater-only.
It can monitor appropriate freshwater shrimp aquarium conditions, although additional water parameters may need separate testing.
No. It is a monitoring system, not an ammonia remover.
No. It only indicates pH changes.
No. Other water parameters require additional testing.
Yes. They continuously monitor water during their expected service life.
Replace them when the expected service period has ended or sensor colour becomes noticeably faded or unresponsive.
Store unused indicators according to manufacturer instructions.
Keep the sensors clean and protected from contamination.
Avoid touching the sensing surfaces.
Do not expose the indicators to harsh cleaning chemicals.
Read the indicators under appropriate lighting.
Replace the sensors when their useful life has ended.
Keep packaging materials away from children and pets.
Seachem Alert Combo Pack 6 Month includes:
1 × Seachem pH Alert – approximately 3–6 months
1 × Seachem Ammonia Alert – approximately 1 year
Total: 2 Continuous Aquarium Water Monitoring Indicators
Seachem Alert Combo Pack 6 Month provides a convenient way to continuously monitor freshwater aquarium pH and toxic free ammonia.
Its advanced colour-changing sensor technology gives aquarium owners easy-to-read water-quality information without batteries, electricity, or repeated chemical testing.
The compact and transparent design fits discreetly inside the aquarium, while the long-lasting sensors make it practical for everyday aquarium management.
Whether maintaining a planted aquarium, tropical community tank, breeding system, or quarantine aquarium, the Alert Combo supports regular observation of important water parameters.
Aquatik Angels is a specialized aquarium and aquascaping store located in Nolambur, Mogappair, Chennai, Tamil Nadu, serving aquarium enthusiasts across India.
We specialize in freshwater aquarium equipment, planted aquascaping, aquarium water-testing products, water conditioners, biological filtration, custom aquarium tanks, terrarium and paludarium supplies, marine aquarium equipment, and professional aquarium maintenance.
Explore our collection of Seachem aquarium water-testing equipment, ammonia monitors, pH monitoring accessories, aquarium conditioners, biological filtration media, and freshwater aquarium essentials.
Looking for Seachem Alert Combo Pack 6 Month Price in India, Buy Seachem Alert Combo Online India, Seachem Alert Combo Chennai, Continuous Aquarium pH Monitor, Aquarium Ammonia Detector, or 2-in-1 Aquarium Water Monitoring Kit?
Shop Seachem Alert Combo Pack 6 Month at Aquatik Angels, your online destination for freshwater aquarium water-testing equipment, planted aquarium products, filtration systems, and professional aquascaping accessories.
Visit our aquarium shop in Nolambur, Mogappair, Chennai, Tamil Nadu, or order online with Pan-India Shipping to eligible serviceable destinations, including Bengaluru, Hyderabad, Mumbai, Pune, Delhi, Coimbatore, Kochi, and other cities across India.
Enjoy Free Delivery on eligible orders.
Website: www.Aquatikangels.com
Aquatik Angels – A Touch of Nature Indoors.
Best Online Aquarium Shopping in India and Chennai.
Recommended Products